Quote:
Originally Posted by oscarin
It is possible to codify that when the alarm is connected or disconnected, it emits a beep, not because it does not come from the factory.
And the traffic signal recognition? I understood that it could be done by coding, I have a driving assistant in my car.
Thanks
|
If you mean having the cars horn beep (or not) with alarm/lock engagement/disengagement, that can be done via idrive under vehicle settings. You may also be able to do it this way (although I have not tried it):
1. Press both the lock and unlock buttons on your remote for two seconds.
2. Watch for the hazard lights to flash three times.
3. Lock the doors and confirm that the horn does not sound.
4. If you want to reactivate the beep feature:
5. Press and hold both the lock and unlock buttons on the remote for at least two seconds.
6. Watch for the hazard lights to flash once. The horn should honk one time.