View Single Post
      03-02-2020, 11:40 PM   #4
Anthony1s
Banned
756
Rep
2,149
Posts

Drives: 2018 Mineral Grey M2
Join Date: Oct 2017
Location: Pennsylvania

iTrader: (0)

I have a DCT but am not 100% sure what you're asking for. If you want me to shift while 100% on throttle (most of my logs are this way). Or apply 100% throttle, let off and shift, then reapply 100% throttle. (doubt this exists in many of my logs as it's not something I normally do). Repeating these both above and below 6000rpm.

Just in case I've already done what you're asking for, here are the previous logs I've taken. Maybe the condition you're looking for exists in them.

http://www.bootmod3.net/log?id=5e18b4b2c090c660d027da23
http://www.bootmod3.net/log?id=5e18b461c090c660d027da1d
http://www.bootmod3.net/log?id=5e179de4c090c660d027d6a2
http://www.bootmod3.net/log?id=5e179d34c090c660d027d69b
http://www.bootmod3.net/log?id=5d70036ac090c652e3aa39b1
http://www.bootmod3.net/log?id=5ce6e0cdc090c61a0ab45557
http://www.bootmod3.net/log?id=5d6ece54c090c652e3aa34c3
http://www.bootmod3.net/log?id=5d6ecec5c090c652e3aa34c5
http://www.bootmod3.net/log?id=5d6ed0cec090c652e3aa34cc
http://www.bootmod3.net/log?id=5d6ed12dc090c652e3aa34cf
http://www.bootmod3.net/log?id=5d700199c090c652e3aa39af
http://www.bootmod3.net/log?id=5d7001bfc090c652e3aa39b0
http://www.bootmod3.net/log?id=5cc1cf55ae729b069556a605
http://www.bootmod3.net/log?id=5ce6df7ac090c61a0ab45556

I let off to 30% throttle in this log between shifts:
http://www.bootmod3.net/log?id=5ce6e1ffc090c61a0ab45558
Appreciate 0