Thread: DIY brake ducts
View Single Post
      09-30-2019, 06:40 PM   #90
backmotor
Enlisted Member
United_States
29
Rep
35
Posts

Drives: 2017 Mineral gray M2 DCT
Join Date: Mar 2017
Location: Toledo, OH

iTrader: (0)

Garage List
I found the scoops at a place called N.E.R.P. LLC in South Bend, Indiana. They are for a Mini Cooper V2. Phone 574.303.6377. (sales@NERP.BIZ).
The opening is about 2" x 6", and is for a 2.5" hose, part number MPOOLSOZN, and was priced at $45 USD each.

The M4 backing plate fit the M2 perfectly, but they were rather pricey.

If I were going to do this again, I would just use this with a 2.5" hose. I would cut a 2.5" hole in the stock backing protection plate and rivet a 2.5" aluminum flange to it. Aircraft Spruce & Specialty Co. has all kinds of flanges for 1" to 3" hoses. 2.5" flange was about $10.00 USD each. Their phone number is 877.477.7823.

Hope this helps.
Appreciate 0