Quote:
Originally Posted by 3t3p
IMO still needs a bit of space between each tip or the ratios don't look right to me.
So the ones I linked to in terms of OD should be ok as the OPs are larger still.
|
I see what you mean, but I like them close.
Basically the Remus tip inlet is smaller than stock, but then widens before going into the main portion of the tip. This was done, presumably, to keep people from sliding them onto the stock exhaust.
The thing is though, the Remus tips are also very long, so in cutting the whole tip down a few inches, the tip slides perfectly onto the stock exhaust end.
In the first pic, from the side, you can see how short the tip now is. And in the second you can see how it slid right onto the stock exhaust once it was cut down.
It'll do until I get my 102mm tips, which will need custom spacing.