Not sure if anyone has documented this before, so thought I'd do a brief write up to show how I did it.
So I had CarPlay coded by @kubax86 (usb method worked great) but not being a factory option my car did not have the WiFi antenna. It would pick up the phone if it was close to radio, but if I moved it would get a bit patchy.
I've had dash trims off before so knew how it all came apart. All in probably took about 15-20 mins. Quite straight forward to do with very few tools.
You'll need some plastic trim wedges, a torx T20, some zip ties and some snips.
I've labelled some pics that I'll post below.
|