[ming_lau]

Originally Posted by Pottah

You can use this and program the home link buttons. You can also order one with the default “open” you’ll never have to worry about it.

https://x-ph.com/cg-precision-vsc-2-...nd-controller/

The stock exhaust has only 1 valve motor and on CG’s website it shows VSC-1 is the correct one. However, the MPE for M2 has two valve motors. The VSC-2 is designed for M2C, M3, and etc per CG’s website. Knowing thar M2C’s exhaust value are controlled by wire to start with, not sure the VSC-2 will work on the BT controller setup. Trying to verify if the VSC-2 is indeed the correct one but had little luck so far. Do you have VSC-2 installed on yours?