View Single Post
      11-22-2018, 01:48 PM   #5
Proctor750
Lieutenant
426
Rep
538
Posts

Drives: E30 M3
Join Date: Aug 2018
Location: Hattie B's

iTrader: (0)

Quote:
Originally Posted by ZM2 View Post
I’ve run a lot of different 18” & 19” combos.

1. I’ve never noticed an impact to running different diameters with MDM on or DSC completely off. Altho, the general rule is you should not run a shorter diameter in the rear vs the front.

2. My 19” VMR V710FF’s were cheaper than my 18” Apex EX-7s. 19” tires are a little more expensive, but you’re usually buying more rubber and width to go with it. If you’re driving the car in a balanced manner (not plowing, using throttle to turn), I’ve found the front & rear tires on a 19” staggered setup wear quite evenly. I don’t find take offs worth it, as you’re spending time/paying for mount & balance more often.
What different 19" have you tried, can you list a few for the m2c guys? Im struggling..
Offsets, wheel and tire specs and spacers used please.

I see from another thread you had 265/30/19 & 295/30/19 Trofeo R’s on the VMR V710FF, did you use spacers? what were the offsets

Last edited by Proctor750; 11-22-2018 at 01:54 PM..
Appreciate 0