Quote:
Originally Posted by cecaa850
Just be sure you put some sort of lubricant on the O-rings so they don't roll and be sure the clip fully seats in the groove.
|
So yesterday when I went under I looked at the right side of the charge pipe and the O ring was in. On the left side though the O ring was just hanging outside of everything. Not sure how it didn't fly off. This was just an error on my part when I was installing. Also Good point with those clips, you really have to have the intercooler piping go all inside as far in as possible or the clips will not seat as tight as possible. I put the O ring in with some lube and made sure those clips were fully in there and the charge pipe was on all the way. We are now boost leak free and where I was noticing the power loss up high it now just pulls and pulls and pulls. Very happy. Thank you for your input.