Hey guys...we've completed phase 1 and have the results.
Despite it being very HOT (118 degrees at the dyno) we went ahead and baselined the car as well as got some numbers for the JB4 on Map 1.
Car was 100% stock on 91 octane fuel but still managed 470whp with the JB4 set to map 1 and we were pleasantly surprised to see 430whp stock given that BMW claims 405bhp.
Here are the logs for the stock run and the run with JB4 on map 1. IAT's were extremely high at 140-150 so again pleasantly surprised that it didn't pull timing.
Stock
Map 1
In addition to baseline we did some Dragy testing to see where we were starting. For stock, we had a DA of 3080 on a non-prepped surface.
When we did the map 1 testing it was warmer and a bit more humid so DA was 3900
Now that we've completed phase 1 and have the baseline #'s we'll move on to phase 2 as we have lots of part to install.
BMS Chargepipes, intakes, oil catch can, and Fuel-It! charge pipe injection kit...
BMS intercooler
Fuel-It! Flex Fuel kit
DeePee's for track use are also scheduled to be here in a couple days...
