View Single Post
      08-01-2017, 08:42 PM   #8
McGary911's Avatar

Drives: 2017 LBB M2 DCT
Join Date: Jan 2017
Location: St Johns, FL

iTrader: (0)

Thumbs up

Well, this worked great.

4 nuts, 10 lamp replacements, 3 minutes of coding and I have my LED tails.

I changed one additional coding, an indicator one to LED. Pretty much everything that said bulb is now saying LED, except for the rear fogs, which now work thanks to the other mod I noted above.

With bimmercode, I didn't even have to get into advanced.

I coded the car with the lights disconnected and got a warning. That went away when I hooked everything back up.

It's so nice when things work the first time.

Thanks again on doing the homework for the lamps and the coding.

If anyone is on the fence, do it up. It's too cheap and easy not to.

Here's a question. When you separate the lens from the housing, there's a ground plug that disconnects between the two. Any idea what that's for? There's no power running that way, so what's the ground for. That had me scratching my head.
2004 E46 ///M3 SMG Convertible Carbon Blk\Imola
2017 LBB ///M2 DCT