Quote:
Originally Posted by m2ruder
OK so I installed the new version (HD core) VRSF 5in street IC and went and did some logs this weekend. 3-4 pulls on the remaining E26 in the tank & stg 2 E30 then filled up with 93 and drove thru that tank of gas then filled up again and did some stg 2 93 pulls. Unfortunately i accidentally deleted the 3,4,5 independent 93 pulls so just have the 3/4/5/6 shift pulls.
the pics in this thread.
Order of pics are:
E26
outside temps were 82 deg
3rd, 4th, 5th, then a 3/4/5/6 shift
93 oct
outside temps were 93 deg
3/4/5 shift
Temp rise at end of pulls was
E26
3rd +0, same as start
4th +13.5
5th +25.7
3/4/5/6 shifts +31.1
93 oct
3/4/5 shifts +31.1
So based on the temp data of the shifting logs either E26 or 93 oct the temp rise was the same +31.1 even though the outside air temps were 11 deg higher for the 93 oct pull and the starting IAT was 6deg higher the end result was the same. Also none of the pulls had any registered knock
|
Looks a lot better than your older VRSF that was really not cutting it for you. I'm not sure there is any way I could do a 3/4/5 shift log, you must really be flying by the end of 5th!
Can you post the links to your logs; I'd like to take a look at the timing, which you've hidden in your charts.
__________________
2018 ///M2 LCI, LBB, 6MT...
Current Performance Mods:
CSF FMIC, ER CP, Fabspeed Cat, Aquamist WMI, GFB DV+, NGK 97506, BM3 (Stage 2 93 OTS), CDV delete, UCP, M2C/M3/M4 Strut Brace, M3/M4 Reinforcement Rings