Quote:
Originally Posted by bimmer98
I just had a new set of OEM rotors warp, which really means inconsistent thickness, and so a shudder developed. Using Pagad pads less than 1000 miles. Not sure how it happened but needless to say am not happy and of course dealership is of no help because of the pads not being OEM. Even though they talked me into using new rotors. Ut developed after the track day.
If you are sure it's not rotors, you might have a small flat spot on the tire that is noticeable on heavy load.
|
You can have the rotors "turned". They essentially shave them to be uniform again. The likely cause is that you had uneven brake cooling which caused the pad wear. Make sure you are properly bringing the pads to temp and doing a cool down lap too.