Quote:
Originally Posted by Spoolin Montego
Please don't use betalink. Use combination of oem screws and self taping ones, long as you have like 15-20 mounting points you will be good
Edit. Also the pre drilled holes probably line up with the oem screws down there. Use those and some extra self tapers evenly spaced under the bumper, just push it straight through the cf
|
I'll never use betalink. Besides I already have the 3M tape, so it's better to go that route.
I was actually thinking the same about using the self tapping screws as an extra precaution. I haven't really seen the underside of the car, so I had no idea if any of the holes in CF splitter would utilize the OEM screws/holes, but you're most likely right. The pre-drilled holes don't look to be drilled in random places, it seems like it's following the OEM screw locations.