Quote:
Originally Posted by andrewc89
Quote:
Originally Posted by Poochie
They will work as normal when the side markers are off but you then need to recode the "priority" mapping, so when you power on the markers with then front fog light button, the turn signals takes priority over the markers or else the light will remain stagnant, when the turn signals are activate.
I have get the parameters together for changing the priority. When you're done above process above, tag me here and I'll guide you from there.
It's best to do it one at a time so it doesn't get confusing.
|
Thinking about doing this on the F87 and/or the F30.
Any update on the priority coding?
|
FEM
Mapping_Nebelschw_R_Priority: [COLOR="DarkRed"]0X01[/COLOR]
Mapping_Nebelschw_L_Priority: [COLOR="DarkRed"]0X01[/COLOR]
Mapping_Blinken_Z_R_Priority: [COLOR="DarkRed"]0X00[/COLOR]
Mapping_Blinken_Z_L_Priority: [COLOR="DarkRed"]0X00[/COLOR]
Mapping_Blinken_V_R_Priority: [COLOR="DarkRed"]0X00[/COLOR]
Mapping_Blinken_V_L_Priority: [COLOR="DarkRed"]0X00[/COLOR]
So what you're doing is reversing the "priority" from the
front fog light/side marker.
The 0X[COLOR="Green"]01[/COLOR]/0X[COLOR="Green"]00[/COLOR], the lower the number, the higher the priority. The higher number, the lower the priority.
The mapping above "blinken" - one represent the turn signal
priority and the other is the hazard lights. I'm not certain which is which but code it all together and you should be fine.