Quote:
Originally Posted by VisualEcho
Quote:
Originally Posted by O8E92M3
I found a wheel setup on an M3 for sale.
I am wondering if they will fit on an F87 M2 with stock suspension.
20x9.5 ET18 265/30R20
20x11 ET37 295/30R20
Any idea? 🙏
Suggestions are appreciated
|
The standard flush fitment on the M2 front is 19 x 9 +17. Your front wheel would be 5.3mm outside of that, and your tire is wider, so I think you'll poke at stock height, and rub on big dips.
The story is the same in the rear, you're 5.7mm outboard of standard flush, and the tire is much wider than stock, so my feelings are the same there.
Maybe someone with first hand experience with these sizes can give you better advice.
NOTE: You might very well get away with this wheel/tire combo if you drop the car, and also camber it to suit the fitment, OR if you leave it stock height and don't mind a bit of poke and don't drive it hard with passengers. |
I have seen the below being recommended for M2.
I wonder how much difference will that difference in offset make