Quote:
Originally Posted by Mosely
Let me see if I can track them down.
Also, updating on the vibration issue, it's been 4-5 months and I have zero vibration.
You can't miss the dimple once you get under there. I had a very tough time getting the MPE to slip far enough over the old exhaust and thus things were very tight on the rear brackets. If I could do it again, I might cut 5-10mm more off forward from the dimple.
|
Having the rubber mounts compressed a little is sure to help dampen any excessive vibrations. Thinking I want to ensure this as well.
Dimple is on the underside correct? I've found the faintest of marks on the underside. Looks like someone tapped a center punch with a feather. Going to be doing some measuring to be sure.