Quote:
Originally Posted by LuvMyE92
Quote:
Originally Posted by Professor MSP
Take a look at this thread: https://f87.bimmerpost.com/forums/sh....php?t=1265176. On page 2 I give the part numbers of the fender-to-body seals, where I purchased them, and provide some thoughts on their effectiveness.
I did not find them difficult to install. As I recall, I used a wooden ruler to assist in poking the seal in the cavity between the front fender and door. |
Thanks Prof! I don't know why the "appreciate" button is disabled on your post, but I do appreciate the help.  |
After installing the rubber door seal and you open the wide, it might begin creaking, as the edge of the inner door rubs on this molding.
I suggest you pick up a can of rubber lubricant and apply it generously, it completely eliminates squeals and rattles..