Quote:
Originally Posted by zellatc
Hi all,
After fixing the rear left lights last year (and ZERO issues since then), last month I started getting the problems in the right one.
Again, I dismounted, checked there were no burns or strange marks, so I just cleaned the pin and connectors:
Also, to assure better contact, I bended the pins slightly . Here you can see 3 of them already bended:
4000 kms later, not a single failure.
So here are my recommendations, before you take the car to the dealer to replace the lights (that WON´T olve the issue) and before you start coding the car (that is just a workaround):
MAKE SURE THE PINS ARE CLEAN AND MAKE SURE THEY MAKE GOOD CONTACT BY BENDING THEM! |
I've cleaned mine with electric contact cleaner. It worked for a day and started doing the same thing again. Haven't tried bending the pins.