BMW M2 Forum - View Single Post - ► Official APEX Wheels Showroom Gallery Thread

dmf · 11-26-2020, 01:45 PM

I suspect I'm going to take advantage of the BF deals once I answer this.

I've got a 2019 M2C and will be getting the Radi-CAL 9668 (fitment template) and Radi-CAL CP9451 kits installed next week.

I was wanting to keep with a staggered setup (295 at the rear is nice) and don't want to run with any spacers. Currently alignment is around -3.5 up front and -2.3 in back. I've also got MPSS installed and I currently run a set of 19" Titan-7 T-S5 wheels on track with 265/30 and 295/30 tires with no issues.

jritt@essex also mentioned previously that these fit the CP9668 without any spacers: Apex EC7 18x9.5+22 and Apex EC7 18x10+33

With all that said and looking at the fitment guide for the M2 I think the best option for me is 18x9.5" ET28 and 18x10.5" ET40

Sadly it looks like there aren't any satin blacks available in either the EC-7R or ARC-8R so the Anthracite finish is probably the way to go.

Does all that make sense or have I overlooked something (and I may be overthinking all this with the info dump above)? Plus if APEX has a shop open Black Friday or Mon 30th I could pop in to check fitments (although I won't have the new BBK yet, rather a set of much larger Brembos). Is it also possible to refinish the wheels (like one of the examples above) to say change an Anthracite over to a Satin Black?

11-26-2020, 01:45 PM	#75
dmf Private 88 Rep 63 Posts Drives: M2 Competition DCT/BSM Join Date: Jun 2018 Location: Mountain View, CA iTrader: (0)	I suspect I'm going to take advantage of the BF deals once I answer this. I've got a 2019 M2C and will be getting the Radi-CAL 9668 (fitment template) and Radi-CAL CP9451 kits installed next week. I was wanting to keep with a staggered setup (295 at the rear is nice) and don't want to run with any spacers. Currently alignment is around -3.5 up front and -2.3 in back. I've also got MPSS installed and I currently run a set of 19" Titan-7 T-S5 wheels on track with 265/30 and 295/30 tires with no issues. jritt@essex also mentioned previously that these fit the CP9668 without any spacers: Apex EC7 18x9.5+22 and Apex EC7 18x10+33 With all that said and looking at the fitment guide for the M2 I think the best option for me is 18x9.5" ET28 and 18x10.5" ET40 Sadly it looks like there aren't any satin blacks available in either the EC-7R or ARC-8R so the Anthracite finish is probably the way to go. Does all that make sense or have I overlooked something (and I may be overthinking all this with the info dump above)? Plus if APEX has a shop open Black Friday or Mon 30th I could pop in to check fitments (although I won't have the new BBK yet, rather a set of much larger Brembos). Is it also possible to refinish the wheels (like one of the examples above) to say change an Anthracite over to a Satin Black? Last edited by dmf; 11-26-2020 at 02:02 PM..
	Appreciate 0 Quote