Quote:
Originally Posted by SFM2C6MT
I'll be adding camber plates in the near future so I'll adjust the heights at that time so it all gets dialed in simultaneously.
|
I figured I would show you some pictures as I have a similar set up, although it was harder than I thought to get a good angle on the pictures.
M Performance Suspension with Front Ride Height 601mm
Camber Plates with -2.6 Deg Camber
763M Wheels with stock tire sizes.
No Spacers
If I'm honest, the way the top of the wheel is tucked in isn't that visually pleasing to me -- I would consider adding spacers in for use on the street. But I am not sure what size would be appropriate.
Curious if anyone is running stock wheel/tire specs with similar camber/ride height with spacers and what the looks like.