Quote:
Originally Posted by M Fifty
Okay, so mixed results.
Fitting - apart from the effort of lifting seats in and out slowly and carefully - was plug and play.
Modules were swapped from old to new seats, and the battery was disconnected for the whole process on unplugging, swapping and plugging back in.
But the airbag lights are on, and the side bolsters don't work (although the lumbar support does)
Everything else works as before.
Edit: Maybe I should have swapped the seatbelt tensioners as well...
For reference:
Old seats: M2 LCI electric seats with side bolster adjustment
New seats: M2C electric seats with side bolster and lumbar adjustment
|
Not sure if it applies, but I've swapped leather seats to the cloth seats on my M2, and I not only had to change the module, but also the wiring harness as the wiring was not 100% the same between the seats (the plug is the same, but the wiring is either re-arranged or was missing).
If your seatbelt tensioner was "tightened" due to an accident, it'll need to be replaced/swapped, otherwise you'll get the AirBag light.
So, i'd start with the wiring (it should be too hard, except for the two wires that go where the side controls are).