Quote:
Originally Posted by iBrakeLate
I tried to install the seats in an 2020 F87 M2 Comp today, and seems like no matter what I do, I can't code out one restraint system error.
I only have the driver seat changed right now, was making sure I can code everything before changing the passenger seat.
I have the factory belt buckle on, the connector is connected correctly, because if I remove the connector I get a secondary code.
I tried to clear all the codes with tool32 but one won't clear.
So far I coded all the following:
Occupancy sensor:
CIS_Beifaher: aktiv -> nicht_aktiv
Driver seat airbag:
Sitzairbag_Thorax_Fahrer: aktiv -> nicht_aktiv
Driver seat position sensor memory:
Sitzpositionsensorserkennung_Sitzmemory_Fahrer: aktiv -> nicht_aktiv
Coded all the memory settings to nicht_aktiv as well.
Any help would be appreciated.
|
For the driver side, you should only have to code:
- Sitzairbag_Thorax_Fahrer (Driver seat airbag)
- Sitzpositionsensor_Fahrer (Driver seat position sensor)
- Sitzpositionsensorserkennung_Sitzmemory_Fahrer (Driver seat position sensor memory)
The occupancy sensor is passenger side only (it's assumed that if the car is in motion, the driver side is occupied).
What is the fault code you're getting?