Quote:
Originally Posted by FaRKle!
For 18mm and greater I use the ECS/Schwaben set where you can attach your torque wrench to the socket itself.
For the 16mm one, I have the cheap Harbor Freight pass through kit. To torque it I put a 19mm crows foot on my torque wrench and grab the hex base of the pass through with it to torque it. This lets me still use the allen or torx hold down in the middle. |
I had one of these too but I don't think it works for the F87 because the inside is a 10mm hex and I couldnt find a 10mm that fits with the schwaben