IND | Introducing Carbon Aero by Sterckenn

empowered_one · 10-03-2017, 01:23 PM

Quote:

Originally Posted by IND-Distribution

Black Sapphire M2 with winglets.

Perfect combination....perhaps my favorite splitter setup to date...

CommitConfirm · 10-13-2017, 12:57 PM

Does anyone know if the S can be removed from the clear via polishing? I?m not a fan of overt branding & that S is a deal breaker.

Nate@IND · 10-13-2017, 03:10 PM

Quote:

Originally Posted by CommitConfirm

Does anyone know if the S can be removed from the clear via polishing? I?m not a fan of overt branding & that S is a deal breaker.

I think that was just a sticker for the product photos. I just pulled one from stock and no logo is on it

mjsaville · 10-19-2017, 04:45 PM

Quote:

Originally Posted by dj2020

Wasted no time. Sterckenn lip arrived today AND installed today! I feel it complements the M Performance front winglets well.

Looks absolutely superb....

How easy is it to install? I'm guessing you had to put the car on a lift but wondering if it could be installed simply by jacking up both sides of the front end?

MJ

dj2020 · 10-19-2017, 05:16 PM

Quote:

Originally Posted by mjsaville

Quote:

Originally Posted by dj2020

Wasted no time. Sterckenn lip arrived today AND installed today! I feel it complements the M Performance front winglets well.

Looks absolutely superb....

How easy is it to install? I'm guessing you had to put the car on a lift but wondering if it could be installed simply by jacking up both sides of the front end?

MJ

Super easy to install. Totally doable by jacking up just the front of the car. There will be 4 new holes you will be drilling out. I used the actual carbon piece as a template to drill the holes. All the hardware is included by Sterckenn.

GrayMoose · 10-22-2017, 02:58 PM

Does this thing come in a non-carbon fiber trim? Something like gloss black would be nice!

just blaze · 10-22-2017, 03:26 PM

Anyone have photos of just the Sterckenn lip from different angles on a AW M2?

fast_spin_echo · 10-22-2017, 03:36 PM

So the instructions state "Please check if the double-sided tape is firmly attached." There was no double-sided tape included. Should double-sided tape be used, or just use the 4 original screws and 4 new mounting screws/washers?

dj2020 · 10-22-2017, 10:45 PM

Quote:

Originally Posted by fast_spin_echo

So the instructions state "Please check if the double-sided tape is firmly attached." There was no double-sided tape included. Should double-sided tape be used, or just use the 4 original screws and 4 new mounting screws/washers?

I did not use any double sided tape, nor was any included with my lip. Like you mentioned, I only used the 4 OE screws and the 4 new included screws/washers/nuts.

Looks like the carbon fiber inserts are attached to the front bumper "fangs" via double sided tape though.

IND-Distribution · 10-23-2017, 10:20 AM

Quote:

Originally Posted by just blaze

Anyone have photos of just the Sterckenn lip from different angles on a AW M2?

This is all that we have of the lip, includes the M Performance Winglets and Sterckenn Bumper inserts.

Quote:

Originally Posted by fast_spin_echo

So the instructions state "Please check if the double-sided tape is firmly attached." There was no double-sided tape included. Should double-sided tape be used, or just use the 4 original screws and 4 new mounting screws/washers?

It can be used but not necessary.

AGM2 · 10-23-2017, 10:52 AM

Quote:

Originally Posted by akkando

Where you get those M mirrors?

see

http://f87.bimmerpost.com/forums/sho...1256865&page=2

Detailers Domain · 10-23-2017, 09:34 PM

clean

mjsaville · 10-25-2017, 05:34 PM

Could someone please confirm / measure the amount of ground clearance once Sterckenn front splitter is fitted to a car with stock suspension?

thanks in advance

MJ

dj2020 · 10-25-2017, 11:56 PM

Quote:

Originally Posted by mjsaville

Could someone please confirm / measure the amount of ground clearance once Sterckenn front splitter is fitted to a car with stock suspension?

thanks in advance

MJ

I don't have stock suspension as I'm lowered on Eibach springs (just a little bit over a 1 inch drop) but my ground clearance from bottom of lip to ground is about 5 inches.

Sorry for the dark photo. I've also included a photo of me exiting my driveway to show the clearance.

mjsaville · 10-26-2017, 01:38 AM

Quote:

Originally Posted by dj2020

I don't have stock suspension as I'm lowered on Eibach springs (just a little bit over a 1 inch drop) but my ground clearance from bottom of lip to ground is about 5 inches.

Sorry for the dark photo. I've also included a photo of me exiting my driveway to show the clearance.

Superb, thanks for taking the time

I'm thinking, if we exclude the 1 inch drop. Then 6 inches should be fine for traffic calming devices / speed bumps, etc.

MJ

abirmaher · 10-27-2017, 03:22 PM

Quote:

Originally Posted by IND-Distribution

Quote:

Originally Posted by OCfromOC

It's either this lip with winglets or the lightweight. Those two are the only subtle ones on the market.

Still waiting to see more pictures.

Black Sapphire M2 with winglets.

[img]https://c1.staticflickr.com/5/4390/3...14de05aa_b.jpg[/img]

Any other pictures by chance on black sapphire with this setup?

IND-Distribution · 10-27-2017, 03:25 PM

Quote:

Originally Posted by abirmaher

Any other pictures by chance on black sapphire with this setup?

This is the only other picture currently.

Yiruna · 11-14-2017, 04:05 PM

Are there any pictures on a mineral grey m2?

horsepower_and_hounds · 11-14-2017, 04:30 PM

Quote:

Originally Posted by Yiruna

Are there any pictures on a mineral grey m2?

What he said

Dogs63 · 06-05-2018, 06:52 PM

Quote:

Originally Posted by IND-Distribution

Black Sapphire M2 with winglets.

Do we know what wheels these are?

just blaze · 06-05-2018, 08:08 PM

Quote:

Originally Posted by Dogs63

Do we know what wheels these are?

Look like M Performance 763M wheels

10-13-2017, 12:57 PM	#24
CommitConfirm Lieutenant 475 Rep 549 Posts Drives: The Bus Join Date: Oct 2016 Location: Berkshire iTrader: (0) Garage List 2017 Ford Focus RS [0.00] 1971 Mk3 Austin Min ... [0.00] 2013 MINI R56 GP [0.00] 2013 MINI R55 Clubvan [0.00]	Does anyone know if the S can be removed from the clear via polishing? I?m not a fan of overt branding & that S is a deal breaker.
	Appreciate 0 Quote

10-22-2017, 02:58 PM	#28
GrayMoose New Member 11 Rep 20 Posts Drives: M2 Join Date: Mar 2017 Location: NYC iTrader: (0)	Does this thing come in a non-carbon fiber trim? Something like gloss black would be nice!
	Appreciate 0 Quote

10-22-2017, 03:26 PM	#29
just blaze First Lieutenant 310 Rep 339 Posts Drives: 2018 M2 Alpine White Join Date: Nov 2016 Location: The Bay, CA iTrader: (2)	Anyone have photos of just the Sterckenn lip from different angles on a AW M2?
	Appreciate 0 Quote

10-22-2017, 03:36 PM	#30
fast_spin_echo Registered 0 Rep 1 Posts Drives: Manual Transmission Join Date: Apr 2017 Location: Ohio iTrader: (0)	Installation question So the instructions state "Please check if the double-sided tape is firmly attached." There was no double-sided tape included. Should double-sided tape be used, or just use the 4 original screws and 4 new mounting screws/washers?
	Appreciate 0 Quote

10-23-2017, 09:34 PM	#34
Detailers Domain BimmerPost Supporting Vendor 1991 Rep 6,916 Posts Drives: 20 M2C / 22 X3MC Join Date: Nov 2008 Location: New Jersey iTrader: (24)	clean
	Appreciate 0 Quote

10-25-2017, 05:34 PM	#35
mjsaville Second Lieutenant 101 Rep 246 Posts Drives: M2 LLB - Arrived 4th Mar 2017 Join Date: Jun 2016 Location: Aberdeen, UK iTrader: (0)	Could someone please confirm / measure the amount of ground clearance once Sterckenn front splitter is fitted to a car with stock suspension? thanks in advance MJ
	Appreciate 0 Quote

11-14-2017, 04:05 PM	#40
Yiruna Captain 394 Rep 599 Posts Drives: M2, C63s, 718 Cayman GT4 Join Date: Aug 2016 Location: California iTrader: (0) Garage List 2018 BMW M2 [0.00]	Are there any pictures on a mineral grey m2?
	Appreciate 0 Quote