[metrickid]

Originally Posted by M.B.

Each his own. There's another LBB on this board running 10.5+32 rears and it looks spot on, I can't see a difference from Detailer Domain's 10.5+35 on pictures.
I guess we have to wait and see. With the deal I got it was worth rolling the dice, worst case it won't be an issue selling them on.

EDITE; found the other Work wheels car. You can argue about the design of the wheel, but an OEM-looking wheel that would sit this way in the fender should look fine in my opinion.
http://f87.bimmerpost.com/forums/sho....php?t=1281573

Spot on is not the word I would use for a wheel that is 10 mm outside the fender. You might like it, I was just joking that this is exactly what a boy racer would consider “great fitment”.

The image below is 2-3 mm less aggressive than your setup. Horrible if you ask me. Lovely if you ask some other people.

[maddoc]

This is probably the ideal set up for 19x9.5 and 19x10.5 - (19x9.5 ET 30/19x10.5 ET40)http://f87.bimmerpost.com/forums/sho...5&postcount=45

[DivideBYZero]

Originally Posted by *mt*

VOSSEN VFS-1 silver
VA: 9*20 ET 20 with 245/30 ZR20 Dunlop Sport Maxx
HA: 10,5*20 ET 42 with 275/30 ZR20 Dunlop Sport Maxx





http://f87.bimmerpost.com/forums/sho....php?t=1295186

Those wheels almost make me hard, they look so good.

[arthurfonz]

My MG with Koya SF11s 265 front with 295 rears

[DSTR]

I still enjoy my silver M437's.

[casestudy83]

Very nice! Can you share to specs?

Originally Posted by DKM2Power

ff 103s

[JTO24]

Originally Posted by DSTR

I still enjoy my silver M437's.

I agree! With a mild drop, this would be spot on

[MineralGreyMetallic]

Mods: Can we please sticky this thread? It's one of the most useful in this sub forum.

[AGM2]

Originally Posted by arthurfonz

My MG with Koya SF11s 265 front with 295 rears

19?

[marcusfva]

Fitted a set of custom BC Forged RS40 in 9x19 ET23 and 10x19 ET33 brushed silver, stock tires (can't change tires size by law in my country).

[lax01]

Originally Posted by marcusfva

(can't change tires size by law in my country).

And I thought the Republik of Kalifornia had dumb laws

[scadagawd]

Originally Posted by Franzino

M3 wheels (my winter set-up)

Is this the 640M setup with Michellin PA4s?

[Aust350z]

Originally Posted by scadagawd

Is this the 640M setup with Michellin PA4s?

Those are 437M?s in Ferric Grey. Ie: Silver M3/4 wheels.

[scadagawd]

Originally Posted by Aust350z

Those are 437M?s in Ferric Grey. Ie: Silver M3/4 wheels.

They look awesome.

[dj2020]

Originally Posted by marcusfva

Fitted a set of custom BC Forged RS40 in 9x19 ET23 and 10x19 ET33 brushed silver, stock tires (can't change tires size by law in my country).

Wheels look great! Is your car lowered? Do your BC wheel widths and offsets give you a flush look?

Also a question for all, do all wheel designs/brands with the same exact width and offset specs fit the same way? Or does fitment depend on wheel design, i.e. spoke concavity.

[marcusfva]

Originally Posted by dj2020

Wheels look great! Is your car lowered? Do your BC wheel widths and offsets give you a flush look?

Also a question for all, do all wheel designs/brands with the same exact width and offset specs fit the same way? Or does fitment depend on wheel design, i.e. spoke concavity.

Thank you
Car is not lowered yet, next step will be probably the M Performance suspension.

With these offset, the wheels give exactly a flush look. I don't like wheels that came out from fenders.

Originally Posted by lax01

And I thought the Republik of Kalifornia had dumb laws

I live in the country where the bureaucracy was invented.
We can't change anything of the car, no lowered suspensions, no wheels, no exhausts, no ecu tuning at all..anything. We shouldn't, but..

[arthurfonz]

Originally Posted by agm2

19?

20''

[mike in o.c.]

Anyone know what kind of wheels these are? They look like some kind of deep dish style (especially the rears).

[MineralGreyMetallic]

Originally Posted by mike in o.c.

Anyone know what kind of wheels these are? They look like some kind of deep dish style (especially the rears).

... and what lip is that?

[lax01]

Originally Posted by mike in o.c.

Anyone know what kind of wheels these are? They look like some kind of deep dish style (especially the rears).

If only LBB looked that good without major alteration via Photoshop filters (or is that a wrap)?

[Archie Bunker]

Originally Posted by lax01

If only LBB looked that good without major alteration via Photoshop filters (or is that a wrap)?

I believe that was a user's rendering of what a high performance M2 variant might look like.

[Artemis]

Originally Posted by MineralGreyMetallic

Mods: Can we please sticky this thread? It's one of the most useful in this sub forum.

This thread is now a sticky.