[peloterogq]

Hi everyone im new in this forum but i need some help about tires im getting from rim 20x10 tire 245x30x20 and back 20x11 tire 285x30x20 it will be a problem for my ///M2 help

[Bt12]

http://f80.bimmerpost.com/forums/sho....php?t=1095397

Autotalent post mid way down

If the m3 fits 305’s in the rear on 20x11.5’s I’d assume you can fit it. Also there are other examples in the thread


The bigger question on fitment with a large and wide wheel is 1) are u lowered and 2) will you run negative camber. The lower you are,...the more negative camber you will likely have to run so the wheels slant into the wheel wells when the suspension compresses. For the front people roll the fenders to make sure it helps with the rubbing...

Oh yeah you will need to make sure your et fits.

So it will depend how low u go.


Separately, 20’s and low low profile, u must live somewhere the roads are like butter...


Good luck

[Bt12]

http://www.willtheyfit.com

U can use this to this to plan...

[peloterogq]

thanks guys for the help im goint to look into

[TampaF87]

Originally Posted by Bt12

If the m3 fits 305’s in the rear on 20x11.5’s I’d assume you can fit it. Also there are other examples in the thread

Nothing about wheel fitment can be translated over to the M2 from the M3/M4.

They have much more room in the fender well than we do.