09-14-2023, 06:29 PM | #1 |
Private
13
Rep 60
Posts |
Got my Alignment Done, Is My Tech correct?
Hi guys,
I just got my alignment done after installing Millway Street camber plates, and I am on OEM suspension otherwise. I wanted to have street and track setting The tech said when I run at max camber for the track, I'll be able to achieve about -3.2deg at around -0.55 toe out. We never actually adjusted to the max setting so I wanted to get some confirmation from the folks here to see if his track setting assumptions are correct. Also, I noticed that the camber plates are at different measurements at the street -1.7deg camber. Is this because I sat in the driver's seat while he was doing the alignment, so my weight impacted this? I was thinking once I know how much millimeters to move the plate on one side, I can apply the same to the other side. Below is my alignment spec. Thanks y'all! Last edited by Boba1214; 09-14-2023 at 06:35 PM.. |
09-14-2023, 06:35 PM | #2 | |
Private First Class
48
Rep 158
Posts |
Quote:
|
|
Appreciate
0
|
09-14-2023, 06:37 PM | #3 | |
Private
13
Rep 60
Posts |
Quote:
|
|
Appreciate
0
|
09-14-2023, 06:47 PM | #4 | |
Private First Class
48
Rep 158
Posts |
Quote:
|
|
Appreciate
1
Boba121412.50 |
Post Reply |
Bookmarks |
|
|