01-13-2024, 01:27 PM | #1 |
Enlisted Member
87
Rep 30
Posts |
Tire size help M2C Titan7 T-D6E
Found some M2C spec Titan7 T-D6E wheels and wondering if my tire choice would work. I have searched and see plenty of APEX specs with the 265/285 combo but wondered specifically about these wheels with my Eibach springs.
Wheels sizes are 19x9.5 +27 and 19x10.5 +44 Am I safe with the 265/285 35 or do I need to go down to 265/285 30? Suspension is completely stock except for springs. |
01-13-2024, 06:06 PM | #2 |
New Member
33
Rep 13
Posts |
I would recommend the 30 series option over the 35 series on a 19' wheel set up.
I'm running 265/295/30 on the same offsets with no rubbing (lowered on EMD lowering springs with camber plates in the front). The 35 series tire may work for stock height with the 265/285 but probably not lowered. My front tire at full lock looks like it almost hits the fender liner but it doesn't, a 35 series most definitely would at least on my setup. |
Appreciate
0
|
02-08-2024, 09:50 AM | #6 |
Major General
2443
Rep 5,912
Posts |
Stock rolling diameter is better matched with the 35 series tires. The front is smaller by 3% and the rear larger by 1.1%. The front is significantly different at 3%. The 35 series would have provided more comfort than the 30 series.
|
Appreciate
0
|
02-08-2024, 01:18 PM | #7 |
Enlisted Member
87
Rep 30
Posts |
I checked the diameter for the tires I got and got an exact .5 reduction for front and rear vs the sock PSS 245/265 combo. I don't believe I can fit 35s without rubbing.
Any examples of 265/285/35 and lowered? |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|