[Phab]

Is there a way to identify a camber correction knuckle?

I had the camber correction knuckles, that add -0.5, installed on my M2 and the left side is off
31217853639
31217853640

Left -1.34
Right -1.99

So right side is spot on and the left seem still stock.

Trying to figure if something is bent or if the wrong part was installed. (of course I don't know what was the alignment before install)

Is there a mark on the knuckle somewhere that would confirm what I have?

[x233]

Originally Posted by Phab

Is there a way to identify a camber correction knuckle?

I had the camber correction knuckles, that add -0.5, installed on my M2 and the left side is off
31217853639
31217853640

Left -1.34
Right -1.99

So right side is spot on and the left seem still stock.

Trying to figure if something is bent or if the wrong part was installed. (of course I don't know what was the alignment before install)

Is there a mark on the knuckle somewhere that would confirm what I have?

The part number is inscribed on the inside of the knuckle. May have to remove some dust/dirt to see it. May be a little tricky to see with the part on the car.