12-01-2016, 08:43 PM | #199 |
BimmerPost Supporting Vendor
2011
Rep 6,916
Posts |
Eventuri Carbon Fiber Engine Cover for the BMW M2 F87
I picked this up from the team at IND not sure if it's on the site yet but I believe they have them in stock. Everyone can use more carbon fiber..... Items that you will need - BMW Logo - part # 11 14 7 788 967 (this is not the same part number on our BMW M2 Engine cover) You will also need to pull the rubber grommets (total 3) out of the oem engine cover and put them into the carbon fiber cover as well as the insulation. Pics below. Since I'm a bit ocd I went ahead and used the Rupes Ibrid Short Neck with the Rupes Yellow Pad and Jeffscar Micro Finishing Polish (coming soon) to remove some of the hazing left behind from possibly the wetsanding and compounding after the clear coat was sprayed. I went ahead and polished it out to remove the haze and bring out the shine. Following it with 2 layers of Nanolex SI3D HD ; ) Haze on the CF Engine Cover Polishing the haze out I opted to remove the Eventuri decal..... Probably should have removed them first before polishing BMW Roundel Emblem Used Nanolex EX to prep the CF Engine Cover for Nanolex SI3D HD A nice thick coat of Nanolex SI3D HD goes on After Swapping out the grommets and insulation from the OEM Engine Cover OEM Engine Cover Back of Engine Cover with Rubber Grommets and Insulation Pulling out the insulation from OEM Cover Back of the CF Cover Installed rubber grommets Without insulation Before with OEM Engine Cover Eventuri Carbon Fiber Engine Cover Last edited by Detailers Domain; 12-01-2016 at 09:08 PM.. |
Appreciate
1
Robban267.00 |
12-03-2016, 09:12 PM | #200 |
BimmerPost Supporting Vendor
2011
Rep 6,916
Posts |
today I removing the rubber nib, removing knobs, removing hair off your tires
used one of the razor blades that we use for clear film installation to clip them off, some use nail clipper or box cutters all good. a nice clean look. something so small and such a big impact ; ) |
Appreciate
0
|
12-08-2016, 08:03 AM | #202 |
BimmerPost Supporting Vendor
2011
Rep 6,916
Posts |
|
Appreciate
0
|
12-09-2016, 09:04 AM | #204 |
Second Lieutenant
536
Rep 289
Posts
Drives: '18 M2 MG 6MT, '03 E39
Join Date: Nov 2016
Location: FL
|
All that carbon fiber in the engine bay looks awesome!
__________________
Current Car | 2018 ///M2 MG 6MT
Previous Car | 2003 E39 530i Sport |
Appreciate
0
|
12-10-2016, 09:34 AM | #205 |
BimmerPost Supporting Vendor
2011
Rep 6,916
Posts |
|
Appreciate
0
|
12-10-2016, 06:59 PM | #206 |
BimmerPost Supporting Vendor
2011
Rep 6,916
Posts |
and so the guys at Rogue Engineering just informed me that my brakes are in ; )
Product Description: (F) 6-Piston Monobloc Calipers | 380x34mm (15') 2-Piece Discs | Type 3 | Color: Yellow Part number: 1N3.9045A5 (R) 4-Piston Monobloc Calipers | 380x28mm (15') 2-Piece Discs | Type 3 | Color: Yellow Part number: 2P3.9044A5 Can't wait to get these on the car |
Appreciate
0
|
12-10-2016, 07:21 PM | #207 |
Living the aloha
241
Rep 449
Posts |
I've never seen a car shaved down below before.
|
Appreciate
1
Detailers Domain2010.50 |
12-12-2016, 04:35 PM | #209 | |
Second Lieutenant
38
Rep 218
Posts |
Quote:
|
|
Appreciate
1
Detailers Domain2010.50 |
12-13-2016, 09:00 PM | #210 |
BimmerPost Supporting Vendor
2011
Rep 6,916
Posts |
Updated
Ready to get them on Removal of stock Installed Front and Rear Afters Last edited by Detailers Domain; 12-15-2016 at 02:43 PM.. |
Appreciate
3
|
12-14-2016, 11:05 PM | #211 |
Resident Engineer
135
Rep 748
Posts |
That BBK is: ohhhhhh myyyyy.
__________________
///M4 (SO/BLK/BLK) Exec, LED, Blk 19s, HK, 6MT <- SOLD
///M2 (LBB), Exec, 6MT <- SOLD 2014 Land Cruiser, Slee Sliders, OME Lift, ARB Onboard Air European Delivery Journal & F8X Door Rattle Fix Machine Shop Directory - www.mfgcenter.com |
Appreciate
1
Detailers Domain2010.50 |
12-15-2016, 02:46 PM | #213 |
BimmerPost Supporting Vendor
2011
Rep 6,916
Posts |
More shots of the Brembos on the car
|
Appreciate
1
automotiveaperture92.50 |
12-15-2016, 02:48 PM | #214 |
Second Lieutenant
93
Rep 248
Posts |
Looks so good, the color combo is awesome build!
|
Appreciate
1
Detailers Domain2010.50 |
12-15-2016, 09:39 PM | #216 | |
Major
1042
Rep 1,345
Posts |
Quote:
|
|
Appreciate
0
|
12-15-2016, 09:49 PM | #217 |
Private
69
Rep 96
Posts |
Beautiful. Nicely done. Everything is on point and you spared no detail. Love it
Question please - where do you have the m perf coilovers set at in terms of height? It appears to be at the lowest setting front and rear, true? Did u have to worry about adjustments to get the perfect corner balance or did u just set them at their lowest position and left it there? I am in process of installing and curious where to set the height. I love how your car looks so would love your advice. Thanks for sharing this build with pics and details! |
Appreciate
1
Detailers Domain2010.50 |
12-15-2016, 10:08 PM | #219 | |
BimmerPost Supporting Vendor
2011
Rep 6,916
Posts |
Quote:
Rears = $3,795.00 --------------------- $8390 Total no where near the ceramics, which I was tossing around with the idea. |
|
Appreciate
0
|
12-15-2016, 10:11 PM | #220 | |
BimmerPost Supporting Vendor
2011
Rep 6,916
Posts |
Quote:
lowest setting plus, to get the look we wanted we did not install the rear adjusters, yes I know crazy but it was put in and it was just as high as the stock set up. the front was the pretty close to the lowest setting, everything else was set to what bmw stated in the manual. pm or email if you have more questions. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
bbs fir, bmw m2, detailersdomain, nanolex, xpel |
|
|