[D CHOI]

Originally Posted by MrBucket

Its $120 for a set of them and they come with the Roundel, X logo, BMW in text, and the ///M logo.

https://www.getbmwparts.com/partloca...catalogid=4462

Takes a flathead screwdriver and about 5 minutes to do the install, most of which is swapping the ///M slide into the projector.

Originally Posted by Swimfanrick

You can get them cheaper from Wind Fire Auto. I got them for $36.99. Work well. Lifetime warranty.
http://www.windfireauto.com/product/m002/
And you get the free "M" logo with them.

http://www.windfireauto.com/product/sa03/

I would feel the genuine BMW parts would be better quality. But it may not be worth it to some people paying a premium. Unless those are the exact same lights.

[Swimfanrick]

Originally Posted by DCHOI

I would feel the genuine BMW parts would be better quality. But it may not be worth it to some people paying a premium. Unless those are the exact same lights.

The picture of the part on realoem.com looks identical to the parts I received from wind fire auto.

[D CHOI]

Originally Posted by Powerbeast

Windows tinted 30% all around
50% Windshield
Ordered Cosmetics via iND!

You got a pic of the front? I know some people tint the back darker than front doors and obviously can't tint the front windshield too dark due to law.

[M3 Adjuster]

Originally Posted by Imran@Evolve

First modification.

Fitted CCB from the F8X M3/M4. Have taken pictures, weighed the discs and calipers too so will make a separate thread after the weekend.

Interesting ..

[M3 Adjuster]

Originally Posted by ric124

Damn that one must have been defective! Looks like whole layer or rubber detached.

Excessive Heat does that ...

[FAN_F1]

Originally Posted by Encinitas CA M2+M5 Owner

Bought my M2 LLB last week in Bakersfield and made it back to Encinitas/San diego in 3 1/2 Hours...thru LA traffic...one of the best rides ever, before 1200 miles...This Sat went to Temecula Wine county with friends..super time, smooth ride....

Welcome to the F87 friends!

I'm in ENC too.

Reach out and we can grab coffee on the 101

[border7]

Originally Posted by Advevo

Thx reuploading!

What seats are those?

[Smiley1175]

Had the M Performance steering wheel installed today.
Just in time for tomorrow's track day.

[LBBDrew]

Originally Posted by Smiley1175

Had the M Performance steering wheel installed today.
Just in time for tomorrow's track day.

Wow that looks amazing. You might be the first to have this installed. I didn't realize it had Alcantara too. What was the cost + installation if you don't mind sharing?

[kylejdavidson]

Originally Posted by LBBDrew

Wow that looks amazing. You might be the first to have this installed. I didn't realize it had Alcantara too. What was the cost + installation if you don't mind sharing?

+1!

[parrnan]

Today, my M2 got its first stone chip...

Yes, only 600 km and already a stone chip ! Just one inch over the right BMW installed protective film just before the rear wheel. The paint on that car seems to be very fragile.

That only confirms that I've made the right decision by having Xpel installed on the whole front end (bumper, hood, fenders, mirrors) and rocker pannels...

[srleadjb]

Put my new plates on

[Lincoln30]

I removed the wireless charger and put in the rubber tray. It is so nice to have the extra depth in the console and I got rid of something I will never use.

Thanks to the directions at this link that made the job easy b/c I didn't have to figure out where the connectors for the charger are located.
http://f30.bimmerpost.com/forums/sho...5&postcount=31

[pup73]

Got the annoying LED hyper flash and random light show coded out, as well as coded off the corner lamps. Much thanks to CodeMyCar.com for the continued excellent service...

-c

[SoCalRob]

Originally Posted by Lincoln30

I removed the wireless charger and put in the rubber tray. It is so nice to have the extra depth in the console and I got rid of something I will never use.

Thanks to the directions at this link that made the job easy b/c I didn't have to figure out where the connectors for the charger are located.
http://f30.bimmerpost.com/forums/sho...5&postcount=31

I may be interested in doing this - did something similar on my X3. Are the instructions given in the linked post exactly applicable to the M2 wireless charger, or did you have to improvise any new steps? Thanks. -scr

[Lincoln30]

Originally Posted by SoCalRob

I may be interested in doing this - did something similar on my X3. Are the instructions given in the linked post exactly applicable to the M2 wireless charger, or did you have to improvise any new steps? Thanks. -scr

Even though he was removing a snap in adapter, the instructions at the link are exact EXCEPT he states and pictures that you need a Torx driver but really a small flat head, hook tool or similar is only used to release the connectors. The rest is done with trim tools and fingers. Just like the instructions, it was necessary to pull hard (you think you are going to break the charger) to get the charger to release. I found to easier to do from the passenger side, sitting in the back seat. Your gonna be back there to remove the vent and unplug the cables, so I just moved the front seat all the way forward and set the tools on the floor in the back and did all the work from there.

[Egress]

Originally Posted by Smiley1175

Had the M Performance steering wheel installed today.
Just in time for tomorrow's track day.

That looks stunning! Now the perfect match with the rest of the carbon parts would be if you ordered 32302413480. That is like the rest of the carbon, not the shiny one you have got.

[SoCalRob]

Originally Posted by Lincoln30

Even though he was removing a snap in adapter, the instructions at the link are exact EXCEPT he states and pictures that you need a Torx driver but really a small flat head, hook tool or similar is only used to release the connectors. The rest is done with trim tools and fingers. Just like the instructions, it was necessary to pull hard (you think you are going to break the charger) to get the charger to release. I found to easier to do from the passenger side, sitting in the back seat. Your gonna be back there to remove the vent and unplug the cables, so I just moved the front seat all the way forward and set the tools on the floor in the back and did all the work from there.

Thanks! I think I'd rather have a roomier center console that a wireless charger. I'll likely do this mod, soon as I get some free time. -scr

[le panecito]

Picked her up from the dealer!!

[IND-Distribution]

Originally Posted by Powerbeast

Windows tinted 30% all around
50% Windshield
Ordered Cosmetics via iND!

Car looks great. Post photos when you install the parts!

[Smiley1175]

Originally Posted by LBBDrew

Wow that looks amazing. You might be the first to have this installed. I didn't realize it had Alcantara too. What was the cost + installation if you don't mind sharing?

Thanks for the comments.
I bought it off an M4 forum member who had his car for 8 months, so practically new for $1200 (AUD), install was $250 (AUD). There's a really good DIY in the forum and you can install it yourself but I didn't have the time.

I know the carbon is different to the M2 carbon but I actually prefer it. There's nothing close in eye view to show a contrast so it doesn't clash. I find the gloss matches better with the gloss of the LED section.

Shift lights came in handy yesterday at the track, no need to look down to pick shift points. Being the first time out for the M2 it really helped.

[M 2173Z]

Originally Posted by Smiley1175

Had the M Performance steering wheel installed today.
Just in time for tomorrow's track day.

Smiley:

That looks awesome! I wasn't aware of an electronic M Performance wheel that fit M2s.

Could you please share the part# of that wheel?

Thanks