[seis-speed]

ASD off, going to turn off rev-match. Nothing else needed for me.

[NO_USER_]

Originally Posted by seis-speed

ASD off, going to turn off rev-match. Nothing else needed for me.

That's perfect

[MZWIE]

ASD off
Folding Mirrors upon locking
Seat memory when closing door
Adjusted temperature values for seat heating
Activated rear fog light
Deactivated headlight washers

[NO_USER_]

Originally Posted by MZWIE

ASD off
Folding Mirrors upon locking
Seat memory when closing door
Adjusted temperature values for seat heating
Activated rear fog light
Deactivated headlight washers

Can we make the seat HOTTER!? What about the steering wheel lol.

[akkando]

Originally Posted by seis-speed

ASD off, going to turn off rev-match. Nothing else needed for me.

Come on get those mirrors folded!

[Bt12]

Originally Posted by hshot_rooke

I believe you can put videos on a USB stick and play from there. I've coded video in motion, but have never tested it.

This might sound stupid... I don’t even know where to download video’s. Netflix and xfinity stream...

[DKX4///M]

Ive heard of people coding full internet (exactly like your pc) but you need Professional BT which I believe I have...But is this avail for Idrive 5

also not a coding issue, but how would I change the cound system to give me an OEM EQ that doesnt just have Bass and Treble?

[BIGBOYQ]

Can you use Carly to:-
Fold mirrors on locking
Increase brightness of Halos

Many thanks

[NO_USER_]

Originally Posted by BIGBOYQ

Can you use Carly to:-
Fold mirrors on locking
Increase brightness of Halos

Many thanks

I think folding mirrors (I had Carly for a brief time). However, some things never coded properly with Carly for me. I now use bimmercode which works flawlessly and does more for much less $.

[DKX4///M]

Originally Posted by BIGBOYQ

Can you use Carly to:-
Fold mirrors on locking
Increase brightness of Halos

Many thanks

Yes...

Just as a warning to those that dont already know this, coding the FEM module or FRM n F series repeatedly with Carly or Bimmercode WILL destroy it...It happened in mt e92 m3 and m2 as cary was releasing so many coding feature updates...Thankfully I was warrantied

[subliminalaudio]

Originally Posted by MZWIE

ASD off
Folding Mirrors upon locking
Seat memory when closing door
Adjusted temperature values for seat heating
Activated rear fog light
Deactivated headlight washers

Have pics of the rear fog light on? USA spec?

[NO_USER_]

Originally Posted by DKM2Power

Yes...

Just as a warning to those that dont already know this, coding the FEM module or FRM n F series repeatedly with Carly or Bimmercode WILL destroy it...It happened in mt e92 m3 and m2 as cary was releasing so many coding feature updates...Thankfully I was warrantied

just fem?

[DKX4///M]

Originally Posted by tehboost

just fem?

well I believe they just call the footwell module the front engine module now but its the interface between the these apps and most of these setting apparently? I just know from my experience and many others...

[SeanWRT]

I am debating on DRL brightness % when headlight is on. Seems 8% or 12% as default. 100% would be dazzling in the dark and washed out a little bit according to some people. Open to opinions as to what % is a good balance?

[specka]

Which section in bimmercode is it for folding mirrors on lock? Whatever I changed doesn't seem to have worked.

So far I've done ASD and iDrive warning, would also like to try the seat moving for easy entry but unsure how to code that.

Thanks.

[dr.roro]

Originally Posted by specka

Which section in bimmercode is it for folding mirrors on lock? Whatever I changed doesn't seem to have worked.

So far I've done ASD and iDrive warning, would also like to try the seat moving for easy entry but unsure how to code that.

Thanks.

- Go into "Front Electronic Module"
- Change "Comfort closing with key fob" to Active
- Change "Fold mirrors when locking vehicle with Comfort Access" to Active
- I would also go ahead and change "Comfort opening with key fob" to Active, and "Unfold mirrors when unlocking..." to Active. This will automatically unfold the mirrors when you unlock.

Note: you have to hold the button down for a second or two to fold when locking. There’s a additional setting to change the delay.


How do you change the ASD in Bimmercode? I’m still not sure I have it on my 2015 F32 435i - pretty sure I don’t, but I’d like to confirm.

[SeanWRT]

Possible to code instrument lighting like this orange/white instead of full orange at dark?

Maybe a little brighter orange/white would be even better.

[specka]

Originally Posted by dr.roro

How do you change the ASD in Bimmercode?

Thanks for your reply re my query.

In response to your question, one of the main items in the ECU list in Bimmercode is Active Sound Design (ASD_01). Im new to this but I assume if you dont see it in your app its not valid for your vehicle.

Cheers

[impulsiv]

How can you add the option to turn off DRLs in i-drive?

[NO_USER_]

Originally Posted by impulsiv

How can you add the option to turn off DRLs in i-drive?

Go to iDrive, vehicle settings, lighting settings, external, deselect "daytime running lights".

This is off of what I remember, might be slightly off.

[impulsiv]

Originally Posted by tehboost

Go to iDrive, vehicle settings, lighting settings, external, deselect "daytime running lights".

This is off of what I remember, might be slightly off.

In Canada DRLs are mandatory so we don’t have this setting. I want to know how tho add it via coding.

[NO_USER_]

Originally Posted by impulsiv

In Canada DRLs are mandatory so we don’t have this setting. I want to know how tho add it via coding.

ohhhh ok I see, sorry, pretty sure there's a DRL coding feature. Maybe someone else can chime in.