BMS Clutch Stop

Rick4345 · 11-12-2021, 12:41 PM

Hi,

I'm trying to resolve an issue with my clutch stop install.

I'm having trouble getting it to start. It seems like the plastic is so hard that I can't get enough flex.

I've been emailing Terry Burger and he's telling me it can't be installed by hand and one has to mash the clutch pedal down to get it in. I haven't seen that in the directions nor heard that from anyone who has ever installed one.

I'm interested in hearing from other users about their experiences.

Thanks!!

happyjack · 11-12-2021, 01:17 PM

i twisted / screwed mine in by hand. then mashed it with the pedal once i got it about half-way in. took less than 2 min.

Wah · 11-12-2021, 02:13 PM

I pushed it in with the clutch. You need to get it part of the way in and lined up properly though... I've heard of people breaking the clutch stop while installing it. try grinding down a little so it goes in.

DarthFader · 11-12-2021, 04:20 PM

I used a Dremel to make it slightly thinner - still very snug but able to push it all the way in.

Wolfman’s Brother · 11-12-2021, 06:17 PM

I gave up and mine is sitting on the shelf. I’ve adapted my brain to the weird ass factory clutch. I think….

3t3p · 11-13-2021, 05:15 AM

Sanded it multiple times then used a filed then used clutch pedal to mash it in.

I am on one washer only which is what I recommend, two at the most.

Don't want to mess up syncros! I got a weird feeling with my gearbox and two washers.

Steelguin · 11-15-2021, 12:04 PM

DCT

annabellapizza · 11-15-2021, 03:26 PM

Quote:

Originally Posted by Steelguin

DCT

Thank you for your input

Aloha Joe · 11-16-2021, 09:17 PM

Did they change it? Installed mine 4 years ago and don’t remember having any problems getting it in. I put on all 3 washers and have had no issues since.

M2Pilot · 11-17-2021, 09:28 AM

Quote:

Originally Posted by Aloha Joe

Did they change it? Installed mine 4 years ago and don’t remember having any problems getting it in. I put on all 3 washers and have had no issues since.

Same, Installed mine last year. Just has to use a little muscle and twist to push it in.

Wolfman’s Brother · 11-17-2021, 09:44 AM

Mine was so oversized it was comical. Cut my hand F’ing with it based on all the comments like the one above.

Just use a little muscle they said….

I was going to create my own that actually worked but I’ve slowly adapted my brain to the weird ass clutch in this car that engages differently at different times.

David.m · 11-18-2021, 03:56 PM

Quote:

Originally Posted by Wolfman’s Brother

Mine was so oversized it was comical. Cut my hand F’ing with it based on all the comments like the one above.

Just use a little muscle they said….

I was going to create my own that actually worked but I’ve slowly adapted my brain to the weird ass clutch in this car that engages differently at different times.

The issues with clutch engagement are due to the Clutch Delay Valve, removed mine after 80K km and wish I'd done it a lot sooner.

Guessing BMS changed manufacturer for the clutch stop, like others mine was easy to install, have been using 2 washers without an issue.

SEAT TIME RULES · 11-18-2021, 04:15 PM

Just spend the money and get the UCP

https://www.turnermotorsport.com/m-9...e-clutch-pedal

Comes with a Easy clutch stop as well

Rick4345 · 11-18-2021, 04:42 PM

Quote:

Originally Posted by SEAT TIME RULES

Just spend the money and get the UCP

https://www.turnermotorsport.com/m-9...e-clutch-pedal

Comes with a Easy clutch stop as well

I'm pretty much to that point

Wolfman’s Brother · 11-18-2021, 08:10 PM

Quote:

Originally Posted by David.m

The issues with clutch engagement are due to the Clutch Delay Valve, removed mine after 80K km and wish I'd done it a lot sooner.

Guessing BMS changed manufacturer for the clutch stop, like others mine was easy to install, have been using 2 washers without an issue.

I’ve read that on here, and beyond being super interesting, it totally lines up with my experience daily driving it. I’m adapting.

Wolfman’s Brother · 11-18-2021, 08:13 PM

Quote:

Originally Posted by SEAT TIME RULES

Just spend the money and get the UCP

https://www.turnermotorsport.com/m-9...e-clutch-pedal

Comes with a Easy clutch stop as well

Mother of god what is this heavenly creation

11-12-2021, 12:41 PM	#1
Rick4345 Lieutenant Colonel 472 Rep 1,659 Posts Drives: 2022 WRX World Rally Blue Join Date: Apr 2009 Location: Somewhere iTrader: (13) Garage List 2022 Subaru WRX GT [0.00]	BMS Clutch Stop Hi, I'm trying to resolve an issue with my clutch stop install. I'm having trouble getting it to start. It seems like the plastic is so hard that I can't get enough flex. I've been emailing Terry Burger and he's telling me it can't be installed by hand and one has to mash the clutch pedal down to get it in. I haven't seen that in the directions nor heard that from anyone who has ever installed one. I'm interested in hearing from other users about their experiences. Thanks!! __________________ Rick
	Appreciate 0 Tweet Quote

11-12-2021, 01:17 PM	#2
happyjack Captain 1657 Rep 922 Posts Drives: '21 F87 M2C 6MT Join Date: Nov 2017 Location: old line state iTrader: (0) Garage List 2015 MINI Hatch 5-door [0.00] 2021 BMW M2 Competi ... [9.67] 2023 BMW X5 xDrive40i [0.00] 2017 BMW X3 xDrive28i [0.00]	i twisted / screwed mine in by hand. then mashed it with the pedal once i got it about half-way in. took less than 2 min. __________________ my garage: '23 G05 xDrive40i m-sport; '21 F87 M2C, 6MT; '17 F25 x-drive28i SAV; '15 F55 mini hatch 5-door retired: '87 E30 MT 'vert; '92 E36 sedan; '99 E36 MT 'vert; '06 E90 x-drive sedan; '07 E83 x-drive30 SAV; '09 E91 x-drive wagon; '12 E89 Z4 MT M-sport; '15 F22 sport line
	Appreciate 1 MeinZwei156.00 Quote

11-12-2021, 02:13 PM	#3
Wah IG@i.am.wah 2779 Rep 3,815 Posts Drives: M2 CS Join Date: Jul 2009 Location: NJ iTrader: (4) Garage List 2022 Tesla Model Y ... [0.00] 1974 BMW 2002 [0.00] 2020 BMW M2 CS [0.00]	I pushed it in with the clutch. You need to get it part of the way in and lined up properly though... I've heard of people breaking the clutch stop while installing it. try grinding down a little so it goes in.
	Appreciate 0 Quote

11-12-2021, 04:20 PM	#4
DarthFader Private First Class 134 Rep 177 Posts Drives: M2, 135i, F23 M240i Join Date: Aug 2016 Location: Wisconsin iTrader: (0)	I used a Dremel to make it slightly thinner - still very snug but able to push it all the way in.
	Appreciate 0 Quote

11-12-2021, 06:17 PM	#5
Wolfman’s Brother Banned 378 Rep 348 Posts Drives: M2 Join Date: Nov 2020 Location: Dirty South iTrader: (0)	I gave up and mine is sitting on the shelf. I’ve adapted my brain to the weird ass factory clutch. I think….
	Appreciate 1 BallHog5873175.50 Quote

11-13-2021, 05:15 AM	#6
3t3p Major 455 Rep 1,389 Posts Drives: M2 Join Date: May 2018 Location: NZ iTrader: (0)	Sanded it multiple times then used a filed then used clutch pedal to mash it in. I am on one washer only which is what I recommend, two at the most. Don't want to mess up syncros! I got a weird feeling with my gearbox and two washers.
	Appreciate 0 Quote

11-15-2021, 12:04 PM	#7
Steelguin Lieutenant 653 Rep 505 Posts Drives: 2021 M2C HHS/DCT Join Date: Dec 2020 Location: Socal iTrader: (0)	DCT
	Appreciate 1 BallHog5873175.50 Quote

11-16-2021, 09:17 PM	#9
Aloha Joe Hanapaa! 393 Rep 449 Posts Drives: 17 M2 6mt, LBB Join Date: Nov 2015 Location: Honolulu, HI iTrader: (0)	Did they change it? Installed mine 4 years ago and don’t remember having any problems getting it in. I put on all 3 washers and have had no issues since.
	Appreciate 1 M2Pilot278.50 Quote

11-17-2021, 09:44 AM	#11
Wolfman’s Brother Banned 378 Rep 348 Posts Drives: M2 Join Date: Nov 2020 Location: Dirty South iTrader: (0)	Mine was so oversized it was comical. Cut my hand F’ing with it based on all the comments like the one above. Just use a little muscle they said…. I was going to create my own that actually worked but I’ve slowly adapted my brain to the weird ass clutch in this car that engages differently at different times.
	Appreciate 1 bluescoupe58.00 Quote

11-18-2021, 04:15 PM	#13
SEAT TIME RULES Major 1105 Rep 1,263 Posts Drives: 20 BMW M2C 17 Mazda MX-5 RF Join Date: Oct 2006 Location: "Get Busy Living, or Get busy Dying" iTrader: (0) Garage List 2020 BMW M2C [5.00]	Just spend the money and get the UCP https://www.turnermotorsport.com/m-9...e-clutch-pedal Comes with a Easy clutch stop as well __________________ 2005-2006 BMWCCA Boston Chapter president 2004 Mazda Rev It Up Finalist 2002-Present HPDE Instructor My 2020M2C Build: https://f87.bimmerpost.com/forums/sh....php?t=1696726
	Appreciate 0 Quote