Exhaust tip slip-ons

DivideBYZero · 03-03-2017, 08:52 AM

Quote:

Originally Posted by ryem3

Where did you get the tips and how much were they?

I got mine from the official BMW eBay store (UK).

ryem3 · 04-29-2017, 02:59 PM

Quote:

Originally Posted by M2 Blur

Resolved... sorry, sometimes you pause in caution.

I was able to wiggle (side to side) past the bottom pronged clips and the tips pushed all the way to the bottom lip are on straight. Now the tips set back further like in your pics and will not easily slip off like before.

Thanks for the pics. That helped.

Has anyone actually pushed them on far enough to also seat the top clips? Mine went on just until the top clips were in contact. Looks like they should go on another 1/4 inch. They stick out farther than the stock tips by the amount of the slash since they can't be mounted any deeper even though they are the exact same length as the stock ones.

M2 Blur · 04-29-2017, 03:28 PM

Quote:

Originally Posted by ryem3

Quote:

Originally Posted by M2 Blur

Resolved... sorry, sometimes you pause in caution.

I was able to wiggle (side to side) past the bottom pronged clips and the tips pushed all the way to the bottom lip are on straight. Now the tips set back further like in your pics and will not easily slip off like before.

Thanks for the pics. That helped.

Has anyone actually pushed them on far enough to also seat the top clips? Mine went on just until the top clips were in contact. Looks like they should go on another 1/4 inch. They stick out farther than the stock tips by the amount of the slash since they can't be mounted any deeper even though they are the exact same length as the stock ones.

I pushed past the top (2) clips, then the bottom clips which is as far as they will go. I just pushed at an angle to clear the top clips, leveled out, then did the same for the bottom clips and pushed till the end of the contoured lip.

ryem3 · 04-30-2017, 09:54 AM

Got them in so the exhaust just enters the bottom of the contoured lip. They look killer with the diffusor.

samsamdar · 02-11-2018, 10:12 AM

Sorry to bring back a dead thread, but how exactly are the clips supposed to look when the ZCP tips are pushed in properly all the way? I feel like they’re sticking out too much... can anyone take a pic of the inside clips?

subliminalaudio · 03-06-2018, 10:08 PM

Quote:

Originally Posted by Glounk

Quote:

Originally Posted by arquitecto

Can you post a few pics from farther away? Showing the whole rear of the car from a few angles? You have the exact combination I am looking at doing, MG with carbon fiber diffuser and the black angle tips. Thanks!

That bM2 badge what happened ?

ORIGIN M. · 03-08-2018, 01:35 AM

Quote:

Originally Posted by OBXBMW

Detective Coatings in Richmond, Va is excellent. They are also official Brembo coater. They have mail in form on their website- about a week turn around and as good as it gets.

Nice!

What color is that?

04-30-2017, 09:54 AM	#48
ryem3 Major 1042 Rep 1,345 Posts Drives: 2020 MB M2 CS Join Date: Mar 2011 Location: Rye, NY iTrader: (0)	Got them in so the exhaust just enters the bottom of the contoured lip. They look killer with the diffusor.
	Appreciate 1 arquitecto535.50 Quote

02-11-2018, 10:12 AM	#49
samsamdar Captain 580 Rep 863 Posts Drives: OG M2 Join Date: Oct 2017 Location: Los Angeles, CA iTrader: (9) Garage List 2018 BMW M2 [6.67]	Sorry to bring back a dead thread, but how exactly are the clips supposed to look when the ZCP tips are pushed in properly all the way? I feel like they’re sticking out too much... can anyone take a pic of the inside clips?
	Appreciate 0 Quote