[Dabozo]

Originally Posted by Mosely

Coded some simple stuff (ASD, Camera, etc), phone was stolen a few days later and before I could back it up. Am I SOL on ever resetting these things? I'm supposed to have the new istep flashed for the recall at some point, so I imagine this will reset it all anyway?

Yes. All will be reset.

[nioh_lbbm2]

is there any way to code out the cluster gauge from dimming when the ambient light is lower during the day time?

[Wilsm2]

If you have used bimmercode what codes have you done?

I have coded

Disabled headlight washers
Removed legal info
Instantl folding mirrors
Removed stop/start
Puddle lights on in reverse

Is there anymore people would recommend?

[ried]

There’s a dedicated section for this topic, and numerous threads for BimmerCode specifically. This is the best one.

[Wilsm2]

Originally Posted by ried

There's a dedicated section for this topic, and numerous threads for BimmerCode specifically. This is the best one.

Thanks

[akkando]

Originally Posted by Wilsm2

If you have used bimmercode what codes have you done?

I have coded

Disabled headlight washers
Removed legal info
Instantl folding mirrors
Removed stop/start
Puddle lights on in reverse

Is there anymore people would recommend?

Disable windows rolling down even key fob is long pressed. Expert mode for that one.

If engine is off and door is opened then electronics get turned off.

ASD off.

Most people like daytime running lights at 100 percent.

if pre LCI then iDrive 5 to 6 lite.

Hard braking makes rear lights flash. this might already be on in your region?

screen mirroring

video will play in motion

[Wilsm2]

Originally Posted by akkando

Disable windows rolling down even key fob is long pressed. Expert mode for that one.

If engine is off and door is opened then electronics get turned off.

ASD off.

Most people like daytime running lights at 100 percent.

if pre LCI then iDrive 5 to 6 lite.

Hard braking makes rear lights flash. this might already be on in your region?

screen mirroring

video will play in motion

Can you screen mirror iPhone? Does it make a big difference 100% day lights

[Aronis]

Used Bimmercode to tune the engine, under "secret options"

Mike

(JK)

[akkando]

Originally Posted by Wilsm2

Can you screen mirror iPhone? Does it make a big difference 100% day lights

I didn't do 100% day lights, they are bright enough as it is for me and I don't know if I will have to replace them sooner if I set them to 100%? But I mention it because it's a popular code option.

I don't know about iphone but Android supports screen mirroring.

[Wilsm2]

Originally Posted by akkando

I didn't do 100% day lights, they are bright enough as it is for me and I don't know if I will have to replace them sooner if I set them to 100%? But I mention it because it's a popular code option.

I don't know about iphone but Android supports screen mirroring.

Lol, I thought the same. That's why I asked as I thought they looked bright enough

[NW_M2]

Is Bimmercode able to turn on your instrument panel/gauge cluster lighting during the day? #PreLCI problems

[AndrewC1989]

Originally Posted by NW_M2

Is Bimmercode able to turn on your instrument panel/gauge cluster lighting during the day? #PreLCI problems

There's no solution that I know of to make it just be on 24/7 like the LCI, but if you go into the front electronic module and change your rain-light sensitivity to 'very sensitive' and set your lights to auto, your headlights (and therefore cluster) will turn on much more frequently than it does now.

Other than that the only solution I can think of is to manually turn your headlights or parking lights on every time you get in the car.

Or you could buy an LCI cluster for $1000 and retrofit it. At least one person on here has successfully done the swap.

[fuzzyboat9239]

Originally Posted by GT1281

I just went back to iDrive 5 and now I lost all my Connected Drive services.

Update: I deleted my phone then restarted it and everything went back to the way it originally was in iDrive 5 before I did the iDrive 6 update. Now I’m using iDrive 6 and everything is good so far. Not going to lie though I definitely started freaking out a little

Hey I am in the same situation, went back to iDrive 5 due to coding failure and no longer have ConnectedDrive services. How did you get it working? What do you mean by 'deleted my phone and then restarted it?'

Thanks

Edit got it working:
Connected drive > options > Update BMW services fixed it

[horsepower_and_hounds]

Thee is a whole information thread in Navigation, iDrive, Audio, Video, Bluetooth, Phone, Cameras, Electronics
Go there and all your question will be answered

[Aronis]

Originally Posted by NW_M2

Is Bimmercode able to turn on your instrument panel/gauge cluster lighting during the day? #PreLCI problems

Dam that would be nice......

Mike

[Aronis]

Originally Posted by andrewc89

Other than that the only solution I can think of is to manually turn your headlights or parking lights on every time you get in the car.

By the way, if you just leave your lights on "on" instead of "auto" the will still shut off when you turn the car off. Even the driving lights.

So that is a reasonable work around.

Mike

[Poochie]

Originally Posted by NW_M2

Is Bimmercode able to turn on your instrument panel/gauge cluster lighting during the day? #PreLCI problems

I read once that this is possible with coding but not in Bimmercode, E-SYS is required to change the parameters. If I stumble on the forum I read it on again, I'll PM you the link.

It disables some unrelated features though, auto-headlight/rain for one.. Try one of expert coders, there's a couple of them vying for business in the regular 2 series coding forum. GL.

All the coding in the cheat sheet below for the F30/32 also works for the F22/87.

http://www.bimmerfest.com/forums/att...1&d=1435768263

[Poochie]

If you want your seat to retract back when you open the door, after shut off (a la 7 series):

Seat module (Driver):
3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = Modus_FA_SLV
3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 64
3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 00

Seat module (Passenger):
3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = UKNOWN, WERTE=03
3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 64
3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 00


The HEX "64" = 100MM retraction but you could lower number by converting the Hex value, so it doesn't go as far back.

Please note, there is no sensor for stopping the seat from retracting backwards, if you have someone in the back seat, they might get squashed. Worked with Bimmercode.

[Saphirschwarz]

Originally Posted by Aronis

Used Bimmercode to tune the engine, under "secret options"

Mike

(JK)

Super excited until i saw the JK.
Hate you.
(JK)

[Aronis]

Originally Posted by Saphirschwarz

Super excited until i saw the JK.
Hate you.
(JK)

Made my day buddy! That was too funny......



Mike

[fuzzyboat9239]

Originally Posted by jmh600cbr

how do you get rid of the intial seat belt chime?

In Bimmercode go to Advanced Crash Safety Module and change Initial Warning after Start to not active

[boostm3]

Originally Posted by Aronis

Used Bimmercode to tune the engine, under "secret options"

Mike

(JK)

Exactly. .I used mine to advance the timing and increase the boost, all while maintaining a dead on 12.0 AFR.. God Bless Bimmercode.