06-26-2016, 02:07 PM | #1 |
First Lieutenant
204
Rep 365
Posts |
Ground Control Camber Plates Installed
I got these a few weeks ago, I held off on the install because I wasn't sure if I was going to add suspension or not. Decided to stay stock for a bit.
I have used GC parts on three previous track builds so I have confidence in the product already. I'm not going too extreme on my M2 but felt it needed camber. I reached out to Trevor about plates. I sent him pictures of the car and GC built a few sets. One for me and another went to North Carolina. Fitment is perfect. GC builds these based on your brand of dampers. Mine were built for the factory setup. Again, perfect fitment. I drove a bit out of my area to a shop in Burbank, Ca. called Race Werkz Engineering. Casey is quickly developing a good rep here in Socal for car set up (and building). When he mentioned Cal Poly Engineering, I knew I chose my shop wisely. |
06-26-2016, 04:27 PM | #2 |
Colonel
2276
Rep 2,515
Posts |
I was waiting or someone to take the plunge. I'm on it. Thanks!
__________________
?16 M2 Long Beach Blue/Black, 6MT
'22 X5 4.0 M Sport Black Sapphire/Tartufo ?22 Tesla Model Y Performance Midnight Silver/White |
Appreciate
0
|
06-27-2016, 12:51 PM | #3 | ||
Private
56
Rep 52
Posts |
Quote:
Quote:
Last edited by GCSystems; 06-27-2016 at 01:25 PM.. |
||
Appreciate
0
|
06-27-2016, 01:56 PM | #4 |
Private First Class
44
Rep 123
Posts |
Those look nice.
Couple of questions... What kind of camber range did you end up with? Easy to set/reset? If easy, does it mess with toe too much to bother? I've got one of these cars coming, and don't plan to track it _much_, but I run some pretty substantial camber on the E36 track car to get reasonable tire wear at any road course. Thanks for your thoughts, Rob |
Appreciate
0
|
06-27-2016, 04:04 PM | #5 | |
Captain
376
Rep 668
Posts |
Quote:
|
|
Appreciate
0
|
06-27-2016, 07:49 PM | #6 |
Colonel
2276
Rep 2,515
Posts |
Ordered...
__________________
?16 M2 Long Beach Blue/Black, 6MT
'22 X5 4.0 M Sport Black Sapphire/Tartufo ?22 Tesla Model Y Performance Midnight Silver/White |
Appreciate
0
|
06-27-2016, 09:47 PM | #7 |
Private
41
Rep 76
Posts |
I'm the NC guy that ordered a set. Got them in last week... Waiting on MCS 2 ways and Hypercoil springs before I install the camber plates and will be doing a full writeup and review.
__________________
F87 LBB ///M2 DCT Forgeline | AP Racing | Ferodo | Ground Control | Hyperco | Essex |
Appreciate
0
|
06-27-2016, 10:23 PM | #8 | |
Captain
625
Rep 796
Posts |
Quote:
|
|
Appreciate
0
|
06-27-2016, 10:54 PM | #9 |
Captain
463
Rep 957
Posts |
Looks like the same ones for a 2r, tons of threads on 2 addicts with them failing. I went through 4 bearings before I gave up on them. Maybe m2 will have better luck.
|
Appreciate
1
Anthony235715.00 |
06-28-2016, 09:56 AM | #10 |
Private
56
Rep 52
Posts |
Hey NC guy that ordered a set! Any ETA on those MCS? I can't wait to see how the new suspension turns out.
|
Appreciate
0
|
06-28-2016, 01:10 PM | #12 | |
Private
56
Rep 52
Posts |
Quote:
|
|
Appreciate
1
|
06-28-2016, 09:10 PM | #13 |
Private
41
Rep 76
Posts |
|
Appreciate
0
|
06-29-2016, 07:39 AM | #14 | |
Private First Class
44
Rep 123
Posts |
Quote:
Looking forward to seeing how this platform goes. Thanks again, Rob |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|