KW v3 settings

_pancho_ · 04-27-2018, 04:11 AM

Hello,

any recommended settings for the shocks for track usage?

I haven't done any modifications from factory on them.
Running 18" square with 265/35 Nankang AR1
Camber plates up front

regards Tobias

M Fifty · 05-11-2018, 01:18 PM

Well, noting that the V3s and MPS appear to start off as the same hardware, BMW recommend going 2 clicks harder on Compression and Rebound damping both front and rear for what's described as "a flat race course". These settings apparently deliver a "more direct feel", but "can be too harsh for street driving".

_pancho_ · 05-29-2018, 09:19 AM

Ok thanks, will try that.

04-27-2018, 04:11 AM	#1
_pancho_ Private 16 Rep 53 Posts Drives: modified F87 M2 Man -17 Join Date: Jan 2010 Location: Stockholm, Sweden iTrader: (0)	KW v3 settings Hello, any recommended settings for the shocks for track usage? I haven't done any modifications from factory on them. Running 18" square with 265/35 Nankang AR1 Camber plates up front regards Tobias
	Appreciate 1 R0me12.00 Tweet Quote

05-11-2018, 01:18 PM	#2
M Fifty Banned 844 Rep 1,962 Posts Drives: M2 & 330CI Join Date: May 2018 Location: The Interweb iTrader: (0)	Well, noting that the V3s and MPS appear to start off as the same hardware, BMW recommend going 2 clicks harder on Compression and Rebound damping both front and rear for what's described as "a flat race course". These settings apparently deliver a "more direct feel", but "can be too harsh for street driving".
	Appreciate 0 Quote

05-29-2018, 09:19 AM	#3
_pancho_ Private 16 Rep 53 Posts Drives: modified F87 M2 Man -17 Join Date: Jan 2010 Location: Stockholm, Sweden iTrader: (0)	Ok thanks, will try that.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search