[alscks0414]

Originally Posted by BishUK

Fitted some shadow 666m's 20".

wondering if you have the offset numbers for rear and front.
Did you also get your carbon ceramic from dealer installed with wheels? Do you keep the warranty intacted for those changes?

Did you get your coil overs tuned as well??

BTW, looking so great!

[BishUK]

Originally Posted by alscks0414

wondering if you have the offset numbers for rear and front.
Did you also get your carbon ceramic from dealer installed with wheels? Do you keep the warranty intacted for those changes?

Did you get your coil overs tuned as well??

BTW, looking so great!

Offsets are same as oem M2 wheels, 20x9 et29 and 20x10 et40 rears, tyres are wider at 265x30 front and 285x30 rear.
I'm not running CCBs, I'm running the oem calipers from MPerformance BBK in Austin yellow - warranty it fine with calipers, not sure about wheels but they look so amazing I don't care!
Car is running on the standard Eibach springs drop, although I have purchased the MPerf coils kit, just haven't fitted it yet.

[chrispraeger]

Originally Posted by BishUK

Fitted some shadow 666m's 20".

Love it !!

[BSMF87]

Originally Posted by BishUK

Fitted some shadow 666m's 20".

Those look sweet! More pics please.

[Bee Pee]

Originally Posted by BishUK

Fitted some shadow 666m's 20".

Bish - nice. BP

[BishUK]

Originally Posted by Bee Pee

Bish - nice. BP

Hey BP, just made the connection! This is my main board, only recently been taking part on the other. Glad you like, looks killer huh!

[Mike_OGm2]

Originally Posted by BishUK

Fitted some shadow 666m's 20".

More pics please!

[BishUK]

Originally Posted by BSMF87

Those look sweet! More pics please.

Originally Posted by Mike2010@135i

More pics please!

As requested chaps, better res this time!

[Bam226]

[Mike_OGm2]

Originally Posted by BishUK

As requested chaps, better res this time!

Thanks. It's gonna be these for bbs CHR for me.

[David1]

Originally Posted by BishUK

As requested chaps, better res this time!

Any spacers on the car with those wheels?

[BishUK]

Originally Posted by David1

Any spacers on the car with those wheels?

666s have same offset as oem M2 rims, pics are with my 10mm spacers on all round, may go to 5mm, haven't decided for sure yet.

[The Prodigy]

Originally Posted by BishUK

666s have same offset as oem M2 rims, pics are with my 10mm spacers on all round, may go to 5mm, haven't decided for sure yet.

Looks awesome!

What tires are you driving? Front 265, back 285? It's unbelievable that this actually fits including 10mm spacers.

Is your M2 lowered?

Thanks a lot!!

[BishUK]

Originally Posted by The Prodigy

Looks awesome!

What tires are you driving? Front 265, back 285? It's unbelievable that this actually fits including 10mm spacers.

Is your M2 lowered?

Thanks a lot!!

Yep, lowered on Eibach springs and yes, standard M4 Comp pack set up, 265f/285r

[horsepower_and_hounds]

Originally Posted by BishUK

Yep, lowered on Eibach springs and yes, standard M4 Comp pack set up, 265f/285r

No spacers right...any rubbing?

[BishUK]

Originally Posted by m2ruder

No spacers right...any rubbing?

Yes, 10mm spacers as above, no rubbing.

[horsepower_and_hounds]

Originally Posted by BishUK

Yes, 10mm spacers as above, no rubbing.

Have you done any hard track days or mountain runs with it? No front fender lip to sidewall contact?
Purpose I asked is I know a guy with a 16 on H&R springs, ZCP wheels with spacers and he cut a tire twice when under hard compression. The M2 has straight bent exposed lips not like the F80/F82 and it will slice right thru the sidewall. I do not know what spacer size he was using as of yet

[jessetaylor1]

Originally Posted by IND-Distribution

You can say we had a few.



[/

Anymore shots of this car?! You can PM me as to not hijack the thread. Waiting on my AW to be built and this build is beautiful! Going to be going for a very similar look.

[norMcal]

Originally Posted by marcusfva

Me too and for that reason, finally I've found what I exactly like and I've ordered some days ago a set of BC Forged RS40 in 9x19 ET23 and 10x19 ET33 brushed silver, the same in the pictures.
Ready in 4 weeks, I will post mine M2 with these.

Did you ever get these wheels? I never saw any pics if you did.

[marcusfva]

Originally Posted by norMcal

Did you ever get these wheels? I never saw any pics if you did.

Yes, posts #208 #214 of this thread

[norMcal]

Originally Posted by marcusfva

Yes, posts #208 #214 of this thread

Oh missed it, CSL wheels do look good on the M2. I like it!

I slight lowering would probably compliment it even more, but I understand it's a compromise in other areas.

[PRustan]

Originally Posted by M.B.

Ordered a set of these babies right here, Work M8R in glim black
I kinda like how they resemble OEM 1M wheels, but with a more aggressive concave and that color will be quite nice on LBB with CF touches in my opinion, it plays between dark shades with a chrome(ish) glitter to it.
I believe it will make for a nice look, without being too much boy-racer thanks to the OEM resemblance.

19x9.5+25 front, deep concave
19x10.5+32 rear, ultra deep concave.

Will post pics once mounted!

M.B. - have you received your wheels yet? Any pics? Really like the look of these wheels and wondering if they turned out as good as you were expecting.