Quote:
Originally Posted by 963mw
Damn. This is the first time I hear about such a thing.
Will have to take a look when installing mine, but ran it for 1.5 years with no problems.
|
Most people have shops install their stuff, in my experience shops don’t care and just make things “fit”...so the customer never knows.
It was pretty frustrating mating the Akrapovic Exhaust to the downpipe...since the lip isn’t big enough, when tightening the clamp it’s almost impossible to have the two touch each other with a perfect seal.
Having only one bracket fit isn’t a big deal but you’d expect it to, so obviously that shows the quality of their products.
As for it touching the coolant line or whatever that metal line is (that’s the reason most downpipes including stock have a dent on the side where it mates to the turbo), I tried to slide a piece of paper in between and it wouldn’t go through this shows there isn’t a gap. As I mentioned, the ER logo welds broke, the logo is also on top of the dent, I noticed the logo plate raised slightly up so perhaps that’s what is touching the line.
It’s working however, as it’s still on my car haha. But if you were buying a new downpipe I suggest you look elsewhere.