Quote:
Originally Posted by qnet
You have to use the original screws that came off your old mirror assemblies and run them into those holes. They are self-tapping. Someone mentioned (it may have been das_m2) that they looked it up, and bought new screws to use. That's not a bad idea, but you can use the old screws. Just make sure you have the assemblies lined up and pressed against the door correctly.
When you carefully run the screws in, they will cut into the material and pull the mirror assemblies in.
|
^^^^ what he said^^^^
Excuse my delayed response. Make sure you feel the mirror housings for any play before putting everything back together.