When ordered with car order, theses are port installed, and you get the sticker. On my Performance Edition there was the addition of aluminum spacers, held in place by a tamper proof set screw. I haven't seen much mentioned about these, and they apparently are not part of the M Performance suspension if you order it from your parts department or independent vendor. These spacers serve no purpose other than making it a pain in the ass to lower your car. The good news is they do say M Performance on them. I had to take a dremel to slot the set screw, which was then easy to back out. To remove them you must pull the rear springs, and the front struts. The front struts need to be partially disassembled to remove them, I just cranked on the adjusting ring and pushed the ring downward.
|