Quote:
Originally Posted by Almaretto
You can either VO code or FDL code. You do not need to do both.
|
If that's the case, why would I bother to do anything other than FDL coding? That's surely much easier...
Is VO coding ever necessary then?
Quote:
|
I promise there are KAFAS2 changes. I would check again. I know you got all the VLD changes; I am not sure if any NGHB were missing in FEM_body.
|
So perhaps the process that I'm going through is wrong, could you confirm this:
- Open the original factory FA file in 'FA Editor'
- Remove 5AP and 8S4 and apply
- Save new modified FA
- Open modified FA in 'Coding Verification'
- Select original factory SVT file
- Select a folder for the NCD-Trace
- Perform Complete Verification
When I compare the KAFAS2 NCD files from this process to the factory NCD files there are no differences at all (besides the coding date section).
When I compare the FEM_BODY NCD files from this process to the factory NCD files, the differences I noted above are found.
Am I doing something wrong?
__________________
2018 ///M2 LCI, LBB, 6MT...
Current Performance Mods:
CSF FMIC, ER CP, Fabspeed Cat, Aquamist WMI, GFB DV+, NGK 97506, BM3 (Stage 2 93 OTS), CDV delete, UCP, M2C/M3/M4 Strut Brace, M3/M4 Reinforcement Rings