View Single Post
      02-05-2017, 10:39 PM   #10
missedapex
Missedapex
missedapex's Avatar
United_States
41
Rep
22
Posts

Drives: BMW
Join Date: Dec 2015
Location: NJ & VA

iTrader: (0)

Quote: They don't look exactly the same in these pics. I'm assuming he means the ones in the top pic? Are we sure this works?[/QUOTE]

Missedapex: Who's 'we'? Yes the part numbers work.....BMW is part sharing....this is why I posted the information.

I listed the part numbers in my original post. Not sure where the confusion is as far as 'which 2 series'. Use the part numbers and all will be fine.

I pulled mine off with a long thin zip tie fished under /behind the reflector, along with plenty of protective painters tape and a heat gun to loosen up the clips.

Also, pulling the wheel well splash panel will not give access to the reflectors. I tried this, doesn't work. Can't get to them from behind the bumper without a fair amount disassembly. Hence the zip tie approach. It's not perfect and I cracked one during removal...this is how I figured out the part number deal.

As far as pics, not sure why they are needed. I painted mine black. Looks great imo, big improvement over stock red reflector.
Appreciate 0