[HKMP7]

Hello All,

Here is a DIY on how I installed the Red M1/M2 Buttons. I did this for the F8x M3/M4 and I fiqured it may help some of you M2C guys and gals.
Its pretty simple just need some patience with the button tabs.

Here are the tools I used

16 mm socket
Torx T20 socket
Impact gun
Electronics phillips screwdriver
Electronics flat head or tiny pick

I'm assuming you know how to remove the airbag
If you dont watch this.

Now Remove the 16 mm bolt with a impact or ratchet.
Then the two connectors.
Pay attention to the position of this alignment indicator for re installation

Original thread here https://f80.bimmerpost.com/forums/sh....php?t=1493828