|
Some people asked about how to loosen up the rear bumper:
1. You do not need to remove the wheel, you should be able to reach in, it'll be easier if you can jack up the car for the side that you are working on
2. There should be 6 screws that you need to take off in total (I'll verify and confirm the socket size)
3. 4 are shown in the picture below, the other two is directly underneath the rear bumper, which I'll try to take some photos
4. Once the screws are removed, you should be able to pull out the rear bumper slightly, giving you enough room to reach in from the back and unclip the three clips on the rear reflector.
5. This should be an easy 20 min job
|