Quote:
Originally Posted by SCMTX
I installed the 400/700 after first trying the 300/600. Also installed a Whiteline front sway bar. TCK recommended street stock settings still very soft imo. Prob need somewhere in the middle of street and track settings. I honestly think a DD car would probably need to be in the 500/800-900 range.
My only real issue with the kit is the front camber plates, or lack of tension on the front springs. Turning the wheel is making noise in the camber plate area....sounds like binding springs. I really doubt it is supposed to be like this. I went with the TCK kit because it came with camber plates, but not I think I prob should have went with Vorschlag for the bearings? Any advice for me?
Thanks
|
I run the 400/700 setup with SA fronts and DA rears...
I have ended up adjusting the shocks 1/2 way between full soft and the recommended track settings. Perfect for me
As for the spring binding issue....mine will do it once in a blue moon.
Usually right after its been sitting in my garage for a few days.
Nothing that bothers me....
I've had TC Kline setups on all 3 of my M cars. E36, E46 and F87.
Very solid, reliable C/O's