Quote:
Originally Posted by lopm2
If you're looking for a way to permanently keep 'On' the obnoxious Red Pimple on to the New M-Performance Exhaust, this DIY will help.
Level of difficulty: Easy
Time required: 5-30 Minutes
Tools Required:
- Flathead Screwdriver/Fingernails
- 4-6 cm of wire, preferably a thin one
- Black Tape
Special thanks to SimNugget for providing detailed information on how to do this!
Detailed guide with pictures below.
Step 1
Remove plastic retainer clips circled in yellow with fingernails/flathead screwdriver and pull trunk fabric until you have access to the relevant wires
Step 2
Switch off MPE Exhaust Module
Step 3
Unplug the Red/Black Cable from the multi-coloured one
Step 4
Craft a 4-6cm wire and bend it in a U-shape
Step 5
Now Insert both ends of the wire respectively in each angle where the black wires lie (Where the blue circles lie in the shitty paint diagram)
It should look something like this
Step 6
Switch on MPE module and test the bypass. If it is not working you must thin out the wiring and push it deeper in the hole
Step 7
Secure the cables in whichever way you prefer. I’m temporarily using Black Tape.
Step 8
Tug cable back in & put trim back together
Step 9
Done! Button will automatically turn on and off with ignition.
 |
Did this today!! life saver thank you! now i don't have to explain to everyone why im going into my boot
