View Single Post
      04-03-2017, 10:08 PM   #1
CosmosMpower
Brigadier General
CosmosMpower's Avatar
2051
Rep
3,714
Posts

Drives: F87c, GT3, MK7 GTI
Join Date: Apr 2011
Location: Frisco, TX

iTrader: (1)

285 Hoosier on 18X10 Apex EC7

Decided to try and shove my old E90 M3 track wheel setup on my M2 to see if it fits. Wheels are Apex EC7, 18x10 square and +25 offset all around. Tires are 285/30/18 Hoosier A6.

The fronts stick out a good bit past the fender and have maybe 2-3mm of clearance to the strut on the inside. I shoved a 4mm piece of cardboard between the tire and shock and it did not fit without forcing it in between. I was pretty shocked they don't rub anywhere so far on the street.

The rears stick out a bunch past the fender as well but my car is stock height and alignment so plenty of travel and clearance and no rubbing on either end. Will be interesting if I lower the car since most people run +33 in the rear instead of +25.

I'll probably put on some 275 slicks that are a good bit skinnier and that should fit in the front for sure after camber plates, still not sure on the rear if I lower the car which is desperately needed.

EDIT: Not sure why some of the pics are sideways, sorry...
Attached Images
       

Last edited by CosmosMpower; 04-03-2017 at 10:14 PM..
Appreciate 2
GVN*2FLY102.00
atc556.50