Quote:
Originally Posted by DETRoadster
Hoping to get some advise on Gyeon Bathe+ shampoo. I understand from the Detailers Domain write up that I can use Gyeon Bathe+ over the top of existing wax. Does this also work the other way around? Can I or should I wax over top of the SI02 that Bathe+ leaves behind? I'm going to do the full blown Gyeon sealant this summer. So I'm basically looking for a wash/wax combo to get me by for the next few months.
So, in short my options are:
1) Wash with a conventional shampoo at high concentration to strip off the existing wax, then wax, then Bathe+ as maintenance washes from there on out to add the SI02 layer on top of the wax.
-Or-
2) Wash with conventional shampoo at high concentration to remove existing wax, followed by another wash with Bathe+ to add the SI02 layer, then wax. maintenance washing after that with Bathe+.
What's preferred?
Thanks!
|
You can do either the washes that contain protections typically can be used on top of a wax, sealant, or coating.