View Single Post
      04-22-2017, 01:18 AM   #201
DETRoadster
Space Force - 4 Star General
DETRoadster's Avatar
11446
Rep
3,264
Posts

Drives: M2 MG 6MT / Moto Guzzi V7
Join Date: Jul 2016
Location: Seattle

iTrader: (1)

Hoping to get some advise on Gyeon Bathe+ shampoo. I understand from the Detailers Domain write up that I can use Gyeon Bathe+ over the top of existing wax. Does this also work the other way around? Can I or should I wax over top of the SI02 that Bathe+ leaves behind? I'm going to do the full blown Gyeon sealant this summer. So I'm basically looking for a wash/wax combo to get me by for the next few months.

So, in short my options are:

1) Wash with a conventional shampoo at high concentration to strip off the existing wax, then wax, then Bathe+ as maintenance washes from there on out to add the SI02 layer on top of the wax.

-Or-

2) Wash with conventional shampoo at high concentration to remove existing wax, followed by another wash with Bathe+ to add the SI02 layer, then wax. maintenance washing after that with Bathe+.

What's preferred?

Thanks!
Appreciate 0